Bearing oil

The use of vapor phase anti-corrosive additives makes it have excellent dynamic and static corrosion resistance

The shaft bears the entire load of the negative machine, so good lubrication has a great relationship with bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricant must be clean and the seal must be good. The main oil injection of this machine (1) Rotary bearings (2) Roller bearings (3) All gears (4) Moving bearings, sliding planes.

2. The newly installed wheel hub is prone to loosening.

Check often.

3. Pay attention to whether the parts of the machine work normally.

4, pay attention to check the wear degree of easy-wearing parts, pay attention to replacing worn parts at any time.

5. The plane of the bottom frame of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, resulting in serious accidents. Hematite beneficiation equipment

6, bearing oil temperature rise, should immediately stop the inspection to eliminate the cause.

7. If there is an impact sound when the gear is turned, it should be stopped immediately for inspection and eliminated. Bearing oil